Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Dynamic WEP (Radius) local

Nameesh NR
Advisor

Dynamic WEP (Radius) local

Hi,

I have configured "Dynamic WEP (Radius Server)
on my 420wl AP. And im facing problem with
Authentication Radius local.

I've configured a WPA_802.1x policy on my
IAS Radius Server.

The 420wl AP is also added as a client on the
Radius Server.

But, when I try to connect to the network via
the SSID created on 420wl, I donot get the IP
address from the DHCP server.

How can I solve this problem ?

Please help.

Thanks & Regards,
Nameesh.

with a local radius. When I want to connect to the AP I have a message from Windows that it can't find a certificate.


am facing similar problem to the one that was discussed as part of this thread.

(1) Have configured Dynamic WEP (Radius Server)
on my Wireless 420wl AP
(2) Configured Network Authentication/Data
Encryption as Open/WEP. Also did the
similar configuration changes as mentioned.

But, the client does not get the IP address
eventhough the 420wl has been added as one
of the Radius Client.

Please let me know what I need to do for my
laptop to get the IP address.

Thanks & Regards,
Nameesh.
Nothing is too small to know, and nothing is too big to attempt.
1 REPLY
Matt Hobbs
Honored Contributor

Re: Dynamic WEP (Radius) local

It sounds as though you don't have your certificates setup correctly.

Have a look through:

http://www.microsoft.com/technet/network/wifi/ed80211.mspx