ERRORs 5308?

[AnatoliyM]

There was a following error
W 10/23/08 05:47:13 chassis: Lost Communication with Slot E
W 10/23/08 05:47:58 chassis: Slot E Download Failed
I 10/23/08 05:48:10 chassis: Slot E Downloading
W 10/23/08 05:48:44 chassis: Slot E Download Failed
I 10/23/08 05:48:45 chassis: Slot E Downloading
I 10/23/08 05:48:49 chassis: Slot E Download Complete
W 10/23/08 05:48:57 chassis: Slot E FabricInterface Error:
LinkErr=0x44010010
RSVPStat=0x9c0a000f IP=0x40171c5c Task ='tDevPollRx ' Task
I 10/23/08 05:48:58 chassis: Slot E Ready
W 10/23/08 18:34:49 chassis: Lost Communication with Slot E
W 10/23/08 18:36:19 chassis: Slot E Download Failed
I 10/23/08 18:36:20 chassis: Slot E Downloading
W 10/23/08 18:36:53 chassis: Slot E Download Failed
I 10/23/08 18:36:55 chassis: Slot E Downloading
W 10/23/08 18:37:30 chassis: Slot E Download Failed
W 10/23/08 18:37:31 chassis: Unable to Download to Slot E. Please Remove Card
In the slot Е I fix(establish) the new module j4820b всеравно chassis: Slot E Download Failed. At installation of the first module in other slot all has earned.
sh ver
Image stamp: /sw/code/build/alpmo (alp11)
Feb 5 2008 15:35:43
E.11.03
3020
Boot Image: Primary

[Evert Goor]

The error points to an error with slot e and the interface to the backplane

Swap slot e with an other card see if the errors returns there is a problem with chasis and need to be replaced else the card.

And log a call with HP Support

[cenk sasmaztin]

hi AnatoliyM

please send me sh tech commad print

[AnatoliyM]

sh tech all

[cenk sasmaztin]

hi AnatoliyM
whic product number slot E

[AnatoliyM]

In the slot Ð was ProCurve J4820B XL 10/100-TX module SG546RC0HF then it(he) was rearranged in the slot G. Excuse for bad English

[cenk sasmaztin]

please change slot e module whit slot g

and you follow switch log

if you see same eror log on slot g fault module

if you see same eror log on slot e fault chasis

[AnatoliyM]

I took obviously Ð¸Ñ Ð¿Ñ Ð°ÐµÐ½ the module J4820B and established it(him) in the slot E and observed Ð²Ñ ÐµÑ Ð°Ð²Ð½Ð¾ a mistake, and the module from the slot E has established in the slot G and all well

[cenk sasmaztin]

sory I not understand

[AnatoliyM]

In the slot E was ProCurve J4820B XL 10/100-TX module s/n SG546RC0HF. There was a mistake:
W 10/23/08 05:47:13 chassis: Lost Communication with Slot E
I 10/23/08 05:47:24 chassis: Slot E Downloading
W 10/23/08 05:47:58 chassis: Slot E Download Failed
I 10/23/08 05:48:10 chassis: Slot E Downloading
W 10/23/08 05:48:44 chassis: Slot E Download Failed
I 10/23/08 05:48:45 chassis: Slot E Downloading
I 10/23/08 05:48:49 chassis: Slot E Download Complete
W 10/23/08 05:48:57 chassis: Slot E FabricInterface Error: LinkErr=0x44010010
RSVPStat=0x9c0a000f IP=0x40171c5c Task ='tDevPollRx ' Task
I 10/23/08 05:48:58 chassis: Slot E Ready

And a bit later following mistake

I 10/23/08 18:35:45 chassis: Slot E Downloading
W 10/23/08 18:36:19 chassis: Slot E Download Failed
I 10/23/08 18:36:20 chassis: Slot E Downloading
W 10/23/08 18:36:53 chassis: Slot E Download Failed
I 10/23/08 18:36:55 chassis: Slot E Downloading
W 10/23/08 18:37:30 chassis: Slot E Download Failed
W 10/23/08 18:37:31 chassis: Unable to Download to Slot E. Please Remove Card

I have pulled out J4820B XL 10/100-TX module s/n SG546RC0HF from the slot E and has established in the slot E new J4820B XL 10/100-TX module s/n SG649RC043
I observe the following message

I 10/24/08 08:07:42 chassis: Slot E Removed
I 10/24/08 08:07:46 chassis: Slot E Inserted
I 10/24/08 08:07:47 chassis: Slot E Downloading
W 10/24/08 08:08:21 chassis: Slot E Download Failed

I withdraw the module J4820B XL 10/100-TX module s/n SG649RC043 from the slot E.
I fix(establish) the module J4820B XL 10/100-TX module s/n SG546RC0HF in the free slot G where all well.