Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Enable 10GE on a Procurve 2910 al switch

4neti
Occasional Contributor

Enable 10GE on a Procurve 2910 al switch

Hi

 

I have a 2910 al 24G switch and is trying to enable the two 10GE SFP+ modules at the back of the switch. How do i do that?

 

When i go to Configuration ----> Device view the back panel is greyed out

 

Is there some special way to enable the 10GBE back ports?

 

Thanks

1 REPLY
xpa
Occasional Advisor

Re: Enable 10GE on a Procurve 2910 al switch

It´s full automatic

 

just mount the modules, connect a GORE cable between them and link led lights on and here you have 2 procurve 2910al connected at 10GB.