Switches, Hubs, and Modems
1748054 Members
4447 Online
108758 Solutions
New Discussion

Engine length errors

 
Lsdsoft
New Member

Engine length errors

I receive this snmp trap once in a while from a good old HP 4000M: "AddrMgr: Switch Engine length errors". I see nothing in the switch event log. Any idea what it is ?
1 REPLY 1
Tore Valberg
Trusted Contributor

Re: Engine length errors

I suspect this is your answer:

These messages indicate that the switch forwarding engine receives an IP packet of a length that is less than the minimum allowed length and then drops the packet.

Tore