Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Exchange CAS WNLB array on VSphere4 - multicast mode

Ivan-Aust
Occasional Advisor

Exchange CAS WNLB array on VSphere4 - multicast mode

I am looking for the correct procedure for configration of a Procurve 8212zl for WNLB in multicast mode (recommened by VMWare)so Outlook clients on a separate internal subnet can access the CAS array.

This seems to be common question with the implementation of Exch2010 but answers and procedures are very hard to come by.

Any help appreciated.
2 REPLIES
nemix
Occasional Advisor

Re: Exchange CAS WNLB array on VSphere4 - multicast mode

Hi,

we´re just build up a Exchange 2010 CAS Array with vShphere 4.1

We just setup a NLB Cluster from this howto:
http://howtoexchange.wordpress.com/2009/12/16/configuring-client-access-array-for-exchange-2010-walkthrough/

and had no Problems to connect to the CAS Array from another vlan.
Maybe you have to configure the ESX to support NLB. You´ll find a howto at the Vmware KB
Ivan-Aust
Occasional Advisor

Re: Exchange CAS WNLB array on VSphere4 - multicast mode

Hi Nemix,

thank you - this is really useflu. Can you supply the VMware KB article number or URL ?