Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

FEC supported on HP Procurve 2524?

jele
Occasional Contributor

FEC supported on HP Procurve 2524?

Hello,

does the HP Procurve 2524 support Cisco FEC channel link for HP NIC teaming? If so, how are the special configs? I have only see LACP trunk for switch interlink.

regards
jens
2 REPLIES
PDnet
Advisor

Re: FEC supported on HP Procurve 2524?

HP stopped supporting the use of FEC trunks on the 2512/2524 platform with the F.05.50 firmware. They now only support LACP and static trunks. If you want FEC trunks, you will need to find a copy of the older firmware. However, you will give up a lot of functionality, such as a useable implementation of LLDP.

If you do find the older firmware, you can configure an FEC trunk using the following commnand syntax:

TRUNK FEC
Example:
TRUNK 1-2 TRK1 FEC

Good luck

stu...
OLARU Dan
Trusted Contributor

Re: FEC supported on HP Procurve 2524?

only the older image versions. in the newer ones, hp took out all non-standars-based features.

cheers,
Dan