Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Fail over or load balanced routing with 6108 and 3400 switches

Eric Jaxon
Occasional Visitor

Fail over or load balanced routing with 6108 and 3400 switches

Hi
I am relatively new to networking but I have been tasked to create a failover route between 3 x 3400 switches on vlan4 and 2 switches on vlan 3. Currently the routing takes place on switch 1 on vlan4 with a port assigned to vlan3, the other 2 x 3400 switches are connected to switch 1 on vlan4. I need to introduce the 6108 to provide a second route from vlan4 to vlan3. Any suggestions or tips on how to do this would be appreciated.

Also am I able to setup a route for voip traffic across the same route as data?

Thanks Eric