Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

GBe2 - Blade Center Switch - Missing SSH

Alen Ahja
Frequent Advisor

GBe2 - Blade Center Switch - Missing SSH

Hi @ all,

I have a phenomen on 4 GBe2-Blade Switches with the actually Firmware (3.01).

I enabled SSH with /c/sys/sshd but now I cannot entered this. The 'sshd' entry disappeared in the menu but the in the config it seems to be enabled but it isn't :(

I have no access to the switches via SSH only via Telnet.

Can anybody explain me why this happened and how I can resolve it?

Thanx - Kind Regards

Alen
2 REPLIES
Alen Ahja
Frequent Advisor

Re: GBe2 - Blade Center Switch - Missing SSH

Hi!

Now i have the reason why I cannot find this setting via Telnet/SSH and why I don't have any access to this.

The Reason is that you must first enable and switch on the SSH feature via the management module over COM1.

Kind Regards

Alen
Richard Jessop
Occasional Advisor

Re: GBe2 - Blade Center Switch - Missing SSH

You can only see this via the serial console.
Please connect directly to the front of the switch and you will find the entry.
for further information feel free to browse bladeconnect.com and also find contact information whom you may call for direct support.