Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Gui problems with a Stack Member

GUI Interface problems
Occasional Visitor

Gui problems with a Stack Member

I have 2 HP 3400cl switches stacked. One configured as the commander and the other as a member. When I use the web interface to manage the switches through the commander I can see that the member has attached successfully and the configuration appears to be ok, but when I select the member switch from the drop down box nothing gets displayed in the GUI. Can anyone help me?
3 REPLIES
Matt Hobbs
Honored Contributor

Re: Gui problems with a Stack Member

When you connect to the web interface, make sure you login with the Manager username/password.

Easiest way is to set both an Operator and Manager password.

I believe this problem can occur if you login as Operator, or Operator has no password.
GUI Interface problems
Occasional Visitor

Re: Gui problems with a Stack Member

You're a star!!! I didn't have a password set-up for the Operator. I've just given it one and it works fine. Thanks Again!
GUI Interface problems
Occasional Visitor

Re: Gui problems with a Stack Member

You need to setup the operator password in addition to the manager password for the gui to work properly