HP 2824 Two switch configuration

[Jedda]

Hi
I have two firewall, below is shown diagram how i am connected between firewall and server.
FW connected to two Switches
Two Switches are connect with each other through link port.
The servers have two connection one for each SW except one hardware have one network interface connected to one SW.

FW1 FW2
| |
\ /
SW1- SW2
| |
| |
\ /
\ /
[Server]
I would like to configure two 2824 switches with four different vlan,if one switch or one port is get defected,the server still able to connect through other Switch.
Any suggestion?