HP 2920- Blown Switch - SD Card config

[fakiee]

Hi,

I have a 2920 whcih blew a chip and now doesnt power on.  I've removed the SD card and copy the data from it.  I have a 2910 to put in its place for the short term while I warrenty the 2920.

Does anyone know how i can read the config file from the SD card so i can configuire the 2910 to be like for like?

Thanks,

Andy

[fakiee]

Most of th einfo I have worked out or converted from hex, but i cant figure out the port mappings, I guess the sring of HEx referes to the 48 ports?

i.e VLAN = 1

PORT_EGRESSMAP=00FFFF7FFFF00000000000000000000000000000000000000000000000000000000000000000000000000000

PORT_FORBIDDENMAP=0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

PORT_UNTAGGEDMAP=00FFFF7FFFF00000000000000000000000000000000000000000000000000000000000000000000000000000