HP 4108GL Routing Problem

[Schweitzer]

Hi,
i´ve problems with the routing feature in my hp 4108gl.
there are three vlans and the routing is enabled.
now after changing the ip-adress of one vlan, the routing does not function.
i´ve no idea, why this happens. is there a special point for routing, that i´ve overseen?
thanks!!!
martin

[Jonathan Axford]

Hi,

Has ALL of the routing stopped? Have upi changed the corresponding clients Defautl Gateway address to reflect the changes made to the VLAN IP?

Try disabling and then re-enabling the IP Routing and seeing what happens...

[Schweitzer]

thank, but i´ve solved the problem.
i´ve resetted the config and after configuring the switch with the same settings, the routing funktion was fine.
bad software.

thanks.
Martin

[Schweitzer]

reset of switch. after new configuration the routing functioned.