HPE Community
Switches, Hubs, and Modems
1753259 Members
6390 Online
108792 Solutions
New Discussion юеВ

Re: HP 4108GL Routing Problem

 
Schweitzer
Occasional Contributor

тАО04-14-2007 10:04 PM

тАО04-14-2007 10:04 PM

HP 4108GL Routing Problem

Hi,
i┬┤ve problems with the routing feature in my hp 4108gl.
there are three vlans and the routing is enabled.
now after changing the ip-adress of one vlan, the routing does not function.
i┬┤ve no idea, why this happens. is there a special point for routing, that i┬┤ve overseen?
thanks!!!
martin
0 Kudos
3 REPLIES 3
Jonathan Axford
Trusted Contributor

тАО04-15-2007 03:28 AM

тАО04-15-2007 03:28 AM

Re: HP 4108GL Routing Problem

Hi,

Has ALL of the routing stopped? Have upi changed the corresponding clients Defautl Gateway address to reflect the changes made to the VLAN IP?

Try disabling and then re-enabling the IP Routing and seeing what happens...

Where there is a will there is a way...
0 Kudos
Schweitzer
Occasional Contributor

тАО04-15-2007 04:10 AM

тАО04-15-2007 04:10 AM

Re: HP 4108GL Routing Problem

thank, but i├В┬┤ve solved the problem.
i├В┬┤ve resetted the config and after configuring the switch with the same settings, the routing funktion was fine.
bad software.

thanks.
Martin
0 Kudos
Schweitzer
Occasional Contributor

тАО04-15-2007 04:13 AM

тАО04-15-2007 04:13 AM

Re: HP 4108GL Routing Problem

reset of switch. after new configuration the routing functioned.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.