Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

HP 4108GL Routing Problem

Schweitzer
Occasional Contributor

HP 4108GL Routing Problem

Hi,
i´ve problems with the routing feature in my hp 4108gl.
there are three vlans and the routing is enabled.
now after changing the ip-adress of one vlan, the routing does not function.
i´ve no idea, why this happens. is there a special point for routing, that i´ve overseen?
thanks!!!
martin
3 REPLIES
Jonathan Axford
Trusted Contributor

Re: HP 4108GL Routing Problem

Hi,

Has ALL of the routing stopped? Have upi changed the corresponding clients Defautl Gateway address to reflect the changes made to the VLAN IP?

Try disabling and then re-enabling the IP Routing and seeing what happens...

Where there is a will there is a way...
Schweitzer
Occasional Contributor

Re: HP 4108GL Routing Problem

thank, but i´ve solved the problem.
i´ve resetted the config and after configuring the switch with the same settings, the routing funktion was fine.
bad software.

thanks.
Martin
Schweitzer
Occasional Contributor

Re: HP 4108GL Routing Problem

reset of switch. after new configuration the routing functioned.