Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

HP 5300 to cisco 3560 trunk/802.1q vlan

Charlie S.
Occasional Advisor

HP 5300 to cisco 3560 trunk/802.1q vlan

I want to trunk a 5300 core to cisco 5360.

I actually have it setup and it appears to be working, but I cannot reach the managment interface of the Cisoc switch.

I created an interface for each vlan on the cisco 3560. now I've done some reading and I think this is incorrect. I just want the cisco to be L2.

Do i just need to remove the intrfaces for all vlans execpt the Default vlan?

How do I put a managment iP on the cisco without a vlan interface?
2 REPLIES
Jonathan Axford
Trusted Contributor

Re: HP 5300 to cisco 3560 trunk/802.1q vlan

You can assign a management IP to VLAN 1 on the Cisco box. This is what Cisco recommends you use this as the Management VLAN anyway.

Make sure that VLAN 1 is tagged on the trunk on the HP5400...
Where there is a will there is a way...
Mohieddin Kharnoub
Honored Contributor

Re: HP 5300 to cisco 3560 trunk/802.1q vlan

Hi

Can you attach the config of both 5400 and 3560 here ?

Good Luck !!!
Science for Everyone