Switches, Hubs, and Modems
Showing results for 
Search instead for 
Did you mean: 

Re: HP 5308XL - Intervlan routing not working

New Member

HP 5308XL - Intervlan routing not working

For some reason I can't get intervlan routing to work on our 5308XL. I've included a copy of the configuration below. The strange thing is, I've used the same config on a HP 2626 with no problems. I have this switch setup in a test environment with all the devices attaching directly to the 5308XL (no routers, firewalls, etc. between). If someone could shine some light on what I may be doing wrong, it would greatly be appreciated.

Running configuration:

; J4819A Configuration Editor; Created on release #E.10.52

hostname "HP ProCurve Switch 5308xl"
module 1 type J4907A
module 2 type J4907A
module 3 type J4907A
module 6 type J4820B
module 8 type J4820B
module 4 type J4820B
module 5 type J4820B
module 7 type J4820B
ip default-gateway
ip routing
snmp-server community "public" Unrestricted
vlan 1
untagged A1,A3-A8,A10-A14,B1-B16,C1-C16,D1-D24,E1-E24,F1-F24,G1-G24,H1-H24
ip address
tagged A15-A16
no untagged A2,A9
vlan 10
name "VLAN10"
untagged A2,A9
ip address
ip helper-address
tagged A15-A16

Honored Contributor

Re: HP 5308XL - Intervlan routing not working


IP Routing is enabled, and you should have inter-vlan routing workig fine,

So if you have a PC connected to port A1 and has:
IP and gateway

Another PC connected to A2 and has:
IP and gateway

PC1 should ping its gateway, and it should ping VLan10 IP and then it should ping PC2.

PC2 also should be able to ping its gateways and Vlan1 IP and PC1.

Just check the configuration of the PCs, and double check your running configuration again and see where do you miss something.

Good Luck !!!
Science for Everyone
New Member

Re: HP 5308XL - Intervlan routing not working

Thanks for pointing out the gateway!!! I typed the gateway address incorrectly on one of the computers. Corrected the address and all is right with the world now. Thanks for the heads up.