Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

HP 5406zl ACL

苏海_1
Occasional Contributor

HP 5406zl ACL

Hi,
I have installed HP Procurve 5406zl 48G switch to my customer. The default VLAN of the switch contains 48 ports and they are being used for Internal private network. The other modelules of the switch contains 10 different VLANs starting from 192.168.10.1/24 to 192.168.19.1/24. My Default_Vlan ip address is 192.168.8.0/24.I want to permit my Default_VLAN from the other VLANs ( from 192.168.10.1/24 to 192.168.19.1/24 ). But can't let them (from 192.168.10.1/24 to 192.168.19.1/24 ) access Default_VLAN(192.168.8.0/24). I know that i can implement this settings throught Access List but i am new on it.What is the exact Access List command settings for this setup ?
Thank you