Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

HP 5412zl and Cisco 1200

lions1855
Occasional Visitor

HP 5412zl and Cisco 1200

I have some AP 1200 with at least three vlans. I need to be able to have, on the HP switch, configure a port that can handle mutiple vlans.

In cisco, the commands used are:

switchport access vlan 300
switchport trunk native vlan 300
switchport mode access

What are the similar commands on the HP 5412zl?

Thanks
1 REPLY
Jeff Carrell
Honored Contributor

Re: HP 5412zl and Cisco 1200

Get this CLI ref guide, it shows how to configure HP ProVision, HP Comware5 and Cisco switches for lots of different functions, in a side-by-side comparison, so if you know one CLI, you see how to do it in a different CLI:
http://h10144.www1.hp.com/docs/training/HP-Networking-and-Cisco-CLI-Reference-Guide_June_10_WW_Eng_ltr.pdf

It also has a brief explanation of the 'key' differences in "Cisco speak" and "ProVision speak" as you will see:

Cisco - access = ProVision untagged
Cisco - trunk = ProVision tagged

hth...Jeff