HPE Community
Switches, Hubs, and Modems
1753797 Members
6990 Online
108799 Solutions
New Discussion

HP 9308 packet loss

 
Johan Eriksson
Advisor

‎03-01-2005 09:57 PM

‎03-01-2005 09:57 PM

HP 9308 packet loss

When establishing a test session sending about 10,3 Mbps, 200 bytes each packet size, 5000 pps between test probes in an VOIP environment over the HP9308 and at the same time logging all packet loss in the test service we experience about 600 packets lost each time a write memory is made to the 9300.

In an VOIP environment packet loss is not good. Any ideas why and how this can be fixed?

Regards,
Johan
Johan
0 Kudos
1 REPLY 1
Jeff Brownell
Valued Contributor

‎03-17-2005 07:42 PM

‎03-17-2005 07:42 PM

Re: HP 9308 packet loss

We'd need to set this up with ixia in the lab to emulate and trouble-shoot. open a call with the call center if you dont mind..
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.