HPE Community
Switches, Hubs, and Modems
1752796 Members
5953 Online
108789 Solutions
New Discussion юеВ

HP 93xx EP-modules

 
SOLVED
Go to solution
Einar_3
Advisor

тАО02-07-2003 04:27 AM

тАО02-07-2003 04:27 AM

HP 93xx EP-modules

Discovered some bug when running web management on the J4885A EP management module on 9308m with 7.6.0 software. Advice: do not use web management, might cause switch reboot.

Has anyone got any experience with these new modules regarding other known problems etc?
I'm about to put this switch in production in a mission-critical environment soon, nice to know problems in advance...

Einar
0 Kudos
2 REPLIES 2
Gonzo Granello
Valued Contributor

тАО03-31-2003 10:08 PM

тАО03-31-2003 10:08 PM

Re: HP 93xx EP-modules

Einar,

I would advise to upgrade the firmware (on the procurve website) to the latest postet. There is no other general known issues that would prevent you from using it in a production enviroment.

Andreas
most time the day i have to mask my contempt for the a-holes in charge......
0 Kudos
SCOOTER
Esteemed Contributor

тАО04-01-2003 01:57 AM

тАО04-01-2003 01:57 AM

Solution

Re: HP 93xx EP-modules

I would not upgrade to 07.06.01b. Wait wor later release.

FW 07.06.00d: From WEB agent, to Monitor> portstat> eth> eth-portatrib
causes the switch to hang.

FW 07.06.01b: From WEB agent, to Monitor> portstat> eth> eth-portatrib
causes the switch to hang.
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.