Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

HP FC Entry Switch 8b reset

Ian Chard_3
Occasional Visitor

HP FC Entry Switch 8b reset

Hi,

I need to reset the ip configuration on the above switch. I need to check the config and probably completely redo it, but no-one here knows the IP address! I'm stuck with out it, so is there anyway of setting it back to as factory defaults? If i try telneting to it, it connects but I get no output at all, so I'm hoping if I can restore it back to factory defaults I can reconfigore it from there.

Had a look through the many manual but couldn't find anything in there.

Cheers
Ian
2 REPLIES
Ian Chard_3
Occasional Visitor

Re: HP FC Entry Switch 8b reset

Sorted it myself, took the CMOS battery out and left it over night! LOL!

Cheers
Ian
Ian Chard_3
Occasional Visitor

Re: HP FC Entry Switch 8b reset

Took the CMOS battery out and left the switch over night to clear the memory. Seemed to do the trick and could then access all RAID sets. :o)