HPE Community
Switches, Hubs, and Modems
1752865 Members
3993 Online
108791 Solutions
New Discussion юеВ

HP ProCurve 2524 switch

 
SOLVED
Go to solution
Lennart Kristjansson
New Member

тАО03-19-2004 05:07 AM

тАО03-19-2004 05:07 AM

HP ProCurve 2524 switch

I have tried to make a VLAN. Now I can't access the switch by the web-interface and the switch don't work at all.
How do I reset the switch to factory settings ?
0 Kudos
2 REPLIES 2
Stuart Teo
Trusted Contributor

тАО03-19-2004 05:49 PM

тАО03-19-2004 05:49 PM

Solution

Re: HP ProCurve 2524 switch

Use the included console cable to connect to the switch.

At the CLI, issue "erase run" and that will cause the switch to reboot to default factory settings. Passwords are not lost.
If a problem can be fixed, there's nothing to worry. If a problem can't be fixed, worrying ain't gonna help. Bottom line: don't worry.
Magnus Johansson_1
Advisor

тАО03-21-2004 07:11 PM

тАО03-21-2004 07:11 PM

Re: HP ProCurve 2524 switch

Or yo can press "reset" and "clear" simultaniusly and then release "reset", when the mgmnt-lamp is flashing you release the "clear" and all configuration on the switch should be gone.
This is also described in the manual for the switch.
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.