HP ProCurve 2810-24G Switch

[André Saramago]

Can anyone tell me how do I access the switch via console port?? I've tried several Tera Term configurations. Get some strange caracters at boot up, but never got the initial prompt.

Thank you all for all help.
AS

[Michael_Breuer]

Hi André,

please try with following settings:

Speed 9600
Databits 8
Stop Bit 1
Parity: None
Flow Controll: None

I am using Putty and this is working for me on all ProCurve switches.

Cheers,

Michael

[André Saramago]

Allready tried several terminal emulators...
Look's like a bad cable issue.
Does anyone knows de pin-out of these console cables?

Thanks!
AS

[cenk sasmaztin]

http://www.kame.net/~suz/cisco-cable.png

samely cisco console cable

[André Saramago]

Thank you all! Wouldn't suspect Cisco cables to work with HP Switch's...

[André Saramago]

Once again..

Thank you all...

Merry Christmas

ANdré Saramago