Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

HP ProCurve 2810-24G Switch

André Saramago
Occasional Advisor

HP ProCurve 2810-24G Switch

Can anyone tell me how do I access the switch via console port?? I've tried several Tera Term configurations. Get some strange caracters at boot up, but never got the initial prompt.

Thank you all for all help.
AS
5 REPLIES
Michael_Breuer
Esteemed Contributor

Re: HP ProCurve 2810-24G Switch

Hi André,

please try with following settings:

Speed 9600
Databits 8
Stop Bit 1
Parity: None
Flow Controll: None

I am using Putty and this is working for me on all ProCurve switches.

Cheers,

Michael
www.ingentive.net
Ingentive Networks GmbH
André Saramago
Occasional Advisor

Re: HP ProCurve 2810-24G Switch

Allready tried several terminal emulators...
Look's like a bad cable issue.
Does anyone knows de pin-out of these console cables?

Thanks!
AS
cenk sasmaztin
Honored Contributor

Re: HP ProCurve 2810-24G Switch

http://www.kame.net/~suz/cisco-cable.png

samely cisco console cable
cenk

André Saramago
Occasional Advisor

Re: HP ProCurve 2810-24G Switch

Thank you all! Wouldn't suspect Cisco cables to work with HP Switch's...
André Saramago
Occasional Advisor

Re: HP ProCurve 2810-24G Switch

Once again..

Thank you all...

Merry Christmas

ANdré Saramago