Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

HP ProCurve 4108 VLANS

Björn Gam
Occasional Advisor

HP ProCurve 4108 VLANS

Hello,

we're using three 4108 ProCurve switches all are connected via a trunk. Now I want access from one port to every defined VLAN.

We have for example at the middle switch the VLAN printers with the VLAN ID 7 (tagged) Mode and now I installed a monitor tool for our LAN. This tool should gather all the information of all VLANs.

At the cisco world you can use something like VTP. But at the HP world? It has to be a classical trunk with access to all VLANs.

But it is not working.
Any idea?
Thanks,
Bjoern