Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

HP ProLiant BL p-Class C-GbE2 Interconnect Switch

stevenich
Occasional Visitor

HP ProLiant BL p-Class C-GbE2 Interconnect Switch

We have configured servers connected to this switch to be able to use Jumbo Frames up to 9000 mtu, but when we try and copy data we get the following error
dot3StatsFrameTooLongs: 2994720

The switch documentation says that Jumbo frame support is automatic and no configuration is required. Why would we get these errors
1 REPLY
Daniel Leblanc
Honored Contributor

Re: HP ProLiant BL p-Class C-GbE2 Interconnect Switch

In particular, an instance of this object can represent a count of receive errors on a particular port that are not otherwise counted

This is the count of frames received on a particular interface that exceeds the maximum permitted frame size. Check the device attached to the port.

Dan

PS:All automatic handling is hp sim menu,OPTION>EVENTS>AUTOMATIC EVENT HANDLING>MANAGE TASK

PS don't ferget to apply you're point,there situated next every message in this thread,next to date and time has UNASSIGNED,then you can apply bye the buton on the botton of the page.

WHY SHOULD YOU DO THIS?
There are 3 reasons why we feel rating replies is such an important feature:

1.) Others have taken time to help you, so please give them credit for their help.
2.) Your rating will help your peers earn points toward their Forums status, and you will validate the quality of the solution you've received.
3.) Other readers will understand which answer best solved a problem, enriching the community knowledge being shared