Switches, Hubs, and Modems
1748213 Members
3135 Online
108759 Solutions
New Discussion

HP Procurve 1400-24

 
dave Blackham
New Member

HP Procurve 1400-24

Is it possible to bond two ports on these switches to provide a 2 Gbit interlinc between two 1400-24 switches. Either then RJ45 or the GBIC ports. I am assuming this needs to be set up on the switch or looping or other problems may occur.
1 REPLY 1
Niels Vejrup Pedersen
Respected Contributor

Re: HP Procurve 1400-24

Hello.

Not possible since the switch does not support LACP

Regards