HPE Community
Switches, Hubs, and Modems
1753774 Members
6767 Online
108799 Solutions
New Discussion

Re: HP Procurve 1400-24

 
dave Blackham
New Member

‎09-22-2009 06:44 AM

‎09-22-2009 06:44 AM

HP Procurve 1400-24

Is it possible to bond two ports on these switches to provide a 2 Gbit interlinc between two 1400-24 switches. Either then RJ45 or the GBIC ports. I am assuming this needs to be set up on the switch or looping or other problems may occur.
0 Kudos
1 REPLY 1
Niels Vejrup Pedersen
Respected Contributor

‎09-22-2009 10:53 AM

‎09-22-2009 10:53 AM

Re: HP Procurve 1400-24

Hello.

Not possible since the switch does not support LACP

Regards
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.