HP Procurve 2524M Switching off Ports

[TimDunton]

Thanks, can you confirm how to extract the config?

[Mohieddin Kharnoub]

Hi
If you can access the Web interface for the switch, then:
Switch Diagnostics > Configuration report,
copy the contents to a text file.

Don;t forget to assign points to posts helped you :)

Good Luck !!!

[TimDunton]

Thanks guys. I've attached the config.

[Mohieddin Kharnoub]

Hi

Why you keep interfaces on 10-auto, any reason?

Try to make it auto:

2524(config)#interface 1 speed-duplex auto.

and if it worked, then:

2524(config)#interface 1-24 speed-duplex auto.

Good Luck !!!

[TimDunton]

Hello,

Yes, I keep them at 10Mb so that no one server can flood our network. Our net connection is just 10Mb anyway so there should be no loss of traffic.

Tim

[Mohieddin Kharnoub]

Have you tried the Auto option ???

[TimDunton]

Which auto option? Auto-100?

[Mohieddin Kharnoub]

Its just Auto

(config)#inter 1 speed-duplex auto

[TimDunton]

I would prefer to keep the network at 10Mb Auto so that no connections can go over the 10Mb threshold. Unless you think that's causing the problem.

[Mohieddin Kharnoub]

Would you try it ?