HP Procurve 2626 and 1800-24 vlan's

[Carlos Miguel Pároco]

Hello,
Iâ m a rookie in vlanâ s and this is probably simple.

I have 2 HP procurve 2626, one in each building connected by optical fiber using port 26(Gb) and i want to create VLAN's on both 2626.

On building â Aâ I have the server room, and on the port 25(Gb) is connected the unmanaged switch HP Procurve 2708 where all the 6 servers of the company are connected, and in the port 24 is connected HP Procurve 1800-24.

On building â Aâ i want to create this VLANâ s:
SERVERS
PRINTERS
FINANCIAL
ADMIN
COMERCIAL
WIFI
GUEST

On building â Bâ a test server (Svr. N), on port 24 and on the port 25(Gb) is connected the HP Procurve 1800-24, and in the port 23 of the first HP Procurve 1800-24 is connected the second HP Procurve 1800-24.

On the building â Bâ i want to create this VLANâ s:
SERVERS
PRINTERS
COSTUMER SERVICES
ADMIN
COSTUMER SERVICES TESTS
PROFESSIONAL SERVICES
LOGISTICS
WIFI
GUEST

The VLANâ s SERVERS, PRINTERS, ADMIN, WIFI AND GUEST are the same in the two buildings, and any user in any VLAN (except the VLAN GUEST â Only internet) should be able to see any server, printer and be able to connect to the internet. The COSTUMER SERVICES VLAN SHOULD SEE ANY VLAN. The default gateway is the firewall address (192.168.1.1), and we have a DHCP SERVER. Some computers and all the 6 servers have static ipaddress.
I want to use Rapid Spanning Tree Protocol (RSTP)

Can someone give me an example of how to do this?

See in the attachment my network diagram:

[Carlos Miguel Pároco]

post incomplete