HPE Community
Switches, Hubs, and Modems
1753663 Members
5899 Online
108798 Solutions
New Discussion юеВ

Re: HP Procurve Hub Ip address

 
David Gonzalez
Occasional Contributor

тАО03-29-2004 03:18 AM

тАО03-29-2004 03:18 AM

HP Procurve Hub Ip address

Does anybody know the default IP address to this type of hub (HPProCurve 10BT 24M?? I'm bulding a test lab and can't seem to communicate with it.
0 Kudos
3 REPLIES 3
Gary Cooper_1
Esteemed Contributor

тАО03-29-2004 07:43 PM

тАО03-29-2004 07:43 PM

Re: HP Procurve Hub Ip address

I guess what you're trying to do is communicate using the web browser interface? The best thing to do here is to connect to it using the console interface (either a VT terminal or hyperterminal on your PC & serial cable), then give it the IP address of your choice.

Regards,

Gary
0 Kudos
Abi_3
New Member

тАО04-20-2004 03:59 AM

тАО04-20-2004 03:59 AM

Re: HP Procurve Hub Ip address

Is it managed or unmanaged hub? If is managed the you can connect to the serial interface as indicated by GC.
Goodluck.
0 Kudos
Stuart Teo
Trusted Contributor

тАО04-21-2004 06:37 AM

тАО04-21-2004 06:37 AM

Re: HP Procurve Hub Ip address

David,

I believe that you're referring to an AdvanceStack, not Procurve? The hub requires a bootp server to assign it an IP address by default. If you do not have a bootp server in your network, the hub will start up with no IP address.
If a problem can be fixed, there's nothing to worry. If a problem can't be fixed, worrying ain't gonna help. Bottom line: don't worry.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.