HPE Community
Switches, Hubs, and Modems
1752778 Members
6215 Online
108789 Solutions
New Discussion

HP Procurve Switch 5406zl

 
Scott Kracht
Occasional Visitor

‎09-10-2010 12:56 PM

‎09-10-2010 12:56 PM

HP Procurve Switch 5406zl

I am struggling with the abilty to configure my switch or even pull the current port configuration. Do you have a manual that show the command in cisco and then the command in HP? Are even if you send me the syntax of how to find what I am looking for.
0 Kudos
1 REPLY 1
Jeff Carrell
Honored Contributor

‎09-10-2010 01:11 PM

‎09-10-2010 01:11 PM

Re: HP Procurve Switch 5406zl

Get this CLI ref guide, it shows how to configure HP ProVision, HP Comware5 and Cisco switches for lots of different functions, in a side-by-side comparison, so if you know one CLI, you see how to do it in a different CLI:

http://h10144.www1.hp.com/docs/training/HP-Networking-and-Cisco-CLI-Reference-Guide_June_10_WW_Eng_ltr.pdf


hth...Jeff
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.