HP Switch OS

[mb664q]

HELLO, where can i find a step by step instructions to upgrade a switch IOS. I am creating a process for doing so and cant seem to find the info needed. If there is no link please provide the step by step instructions via email

[Jeff Carrell]

Info is in most relnotes of zipped file for code update:

To perform an update to your switch software, follow the steps below (see page 7 for detailed steps):
1. Download the image to your TFTP server.
2. Save your current configuration (Config1) to a backup configuration file (Config2).
3. Save your current configuration to an external tftp server.
4. Backup your current running image (Primary) to the secondary image.
5. Set your secondary image to boot with Config2.
6. Download the new image to the switchâ s primary image.
7. Verify that your images and configuration are set correctly.
8. Reload the switch.


for commands, see the cli guide, chapter 3.

http://h17007.www1.hp.com/docs/interoperability/Cisco/HP-Networking-and-Cisco-CLI-Reference-Guide_June_10_WW_Eng_ltr.pdf

hth...Jeff

[mb664q]

thank you very much. where can i find the os files.

[Jeff Carrell]

mb664q asked: "where can i find the os files"

start at www.hp.com/networking select the "support" tab, navigate to your product.

hth...Jeff