Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

HP TopTools Performance gauges not working

HP TopTools Performance gauges not working

Hello. I'm new to TopTools and am having trouble collecting netwrok statistics. I have a feeling that it might be caused by an incorrect topology, but can't be sure. The topology is configured as a starting point of 192.168.1.0 with a mask of 255.255.255.0. I need to see the overall performance of the network and the top 5 talking nodes. It appears to only be reading one segment, which is the starting point, so it shows no activity. How do I expand the segment to the entire scope?

Thanks much!
2 REPLIES
OLARU Dan
Trusted Contributor

Re: HP TopTools Performance gauges not working

Damian,
see this thread about HP TopTools

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=690933

Neil dropped HPTT and took on ProCurve Manager (PCM).

BTW: you could give a try to Kiwi's CatTools2, which is an excelent tool even for HP switches. You will not believe what you can do with this tool:

http://www.kiwisyslog.com/cattools2.htm

Re: HP TopTools Performance gauges not working

Thanks - I'll check these out.

Damian