HP2520 Don't accept ip helper-address?

[AAPP_TOLEDO]

Hi to All,

Recently in my work I've received an HP 2520-24-PoE with S.14.03 IOS and I need to confgure to use it.

Ok.. when I configure the Voice Vlan I configure this:

vlan 10
name "Voice Vlan"
ip address 10.233.2.136 255.255.255.192
tagged 1-24
voice

But when I try to configure the IP HELPER-ADDRESS command it's impossible bacause is not recognized by the Switch.... What Happend?

I've configured 5406zl, 2610-24-PWR and 3500yl-24G PoEs Switch and always I used to configure with ip helper-address command?

I can configure without it anyway? Any idea or suggestions?

Thanks a lot in advance and Greetings from Spain!


Mariano.

[cenk sasmaztin]

very normal

2520 switch unable routing (only L2)
for running ip helper on switch fristly ip routing must be enable


but 2520 unable routing

[AAPP_TOLEDO]

Solved! :)