HP2524 switch,Devices on same switch,same VLAN,with IPs on same network not able to Ping each other

[gurumagic9]

I have an HP 2524 switch.  I have 7 devices, all of which have IP's that are on the same network.  They are all plugged into this 2524 switch.  My VLAN config is as such

; J4813A Configuration Editor; Created on release #F.05.55

hostname "DMZ_HP-2524"
cdp run
ip default-gateway 74.xxx.xxx.192
snmp-server community "public" Unrestricted
vlan 1
name "DEFAULT_VLAN"
untagged 25-26
no ip address
tagged 12
no untagged 1-11,13-24
exit
vlan 2
name "WEB_SERVERS"
untagged 1-11,13-22
ip address 74.xxx.xxx.197 255.255.255.224
tagged 12
exit
vlan 61
name "WLAN-PUBLIC"
untagged 24
no ip address
tagged 12
exit
vlan 101
name "Internl_link"
untagged 23
tagged 12
exit
primary-vlan 2
no aaa port-access authenticator active

My devices are using IP's that are in the network range:

74.xxx.xxx.193 - 74.xxx.xxx.222

255.255.255.224

so they should be able to see each other.  When I try to ping 74.xxx.xxx.193 from 74.xxx.xxx.196 or any other computers on the network, it doesn't work.  If I try to ping directly from a telnet session on this same switch, it cannot ping the devices plugged into either.  All of these devices are plugged into ports 1-11.  If I ping google from one of these devices, it works just fine.  None of these machines have firewall enabled during this testing.  I have another switch that uses just a default VLAN and devices connected to it, can ping the devices on the former switch.  Any ideas?  I've been googling to my hearts content and cannot find any resolution.  I can provide more information if needed.  Any help is greatly appreciated.

T

[gurumagic9]

Solved.  This was actually failing because of a NAT rule.