HP2650 VLAN routing

[Harold Parker]

I did some more troubleshooting last night. It is not only DNS that does not work from VLAN 100. I can ping an IP on the internet from the Default VLAN but not from VLAN 100. Looks like I cant get out to the internet from VLAN 100. I can only get as far as my ISP gateway 192.168.1.1 from VLAN 100.

[cenk sasmaztin]

please check vlan 100 member pc must be default gateway address 192.168.100.1

[Harold Parker]

Yes, vlan 100 member does have default gateway address 192.168.100.1

VLAN 100 member can ping ISP gateway 192.168.1.1 but that is as far as I can get.

I am using a Linksys WRT54G v4 as my ISP router. Dont know if that matters - should just route packets right? I have a static route to get back to VLAN 100

[cenk sasmaztin]

no need any routing check access control list on router or firewall

[cenk sasmaztin]

vlan 100 routing overlap other routing command on isp router


Destination LAN IP Subnet Mask Gateway Hop Count Interface
***192.168.100.0 255.255.255.0 192.168.1.104 0 LAN & Wireless
192.168.1.0 255.255.255.0 0.0.0.0 0 LAN & Wireless
***192.168.30.0 255.255.255.0 192.168.1.104 0 LAN & Wireless
***192.168.200.0 255.255.255.0 192.168.1.104 0 LAN & Wireless
98.229.32.0 255.255.240.0 0.0.0.0 0 WAN (Internet)
0.0.0.0 0.0.0.0 98.229.32.1 0 WAN (Internet)





I don't understand some routing commad

this routing command make any ip ,any subnet go to 98.229.32.1
what for necessary this routing on router ?

0.0.0.0 0.0.0.0 98.229.32.1 0 WAN (Internet)(what for ?)


this routing commad make 98.229.32.0 network go to any ip address
what for necessary this routing on router ?
98.229.32.0 255.255.240.0 0.0.0.0 0 WAN (Internet)


192.168.1.0 255.255.255.0 0.0.0.0 0 LAN & Wireless (what for)



and for full routing performance must be associate some routing commad (***)

associate same command all (star)

192.168.0.0 255.255.0.0 192.168.1.104


my advice clear all routing command your isp router

and write one command and test

one commad

192.168.0.0 255.255.0.0 192.168.1.104