HPE Community
Switches, Hubs, and Modems
1753968 Members
7608 Online
108811 Solutions
New Discussion

Re: HP3400 and firmware M_10_06

 
SOLVED
Go to solution
Vagin Stas
Occasional Contributor

‎09-13-2006 09:31 PM

‎09-13-2006 09:31 PM

HP3400 and firmware M_10_06

After download latest firmware M_10_06 to HP3400 I have next trouble.
In telnet session, in menu IP configuration I don't can enter ip address dns server. Therefore, I don't save any changes here. As it is required to enter any ip address, not blank.
I understand, that it can be made through CLI, but it less conveniently.
How it to correct?

0 Kudos
1 REPLY 1
Ralph Bean_2
Trusted Contributor

‎09-14-2006 04:15 AM

‎09-14-2006 04:15 AM

Solution

Re: HP3400 and firmware M_10_06

Hi Vagin -

M.10.07 has the fix.

You can get M.10.07 from ProCurve Support. I assume that it will be posted on the Web soon.

Ralph
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.