Help with VLAN / Trunking HP 2810

[Ricardo Saramago]

Hello,

I have two sites connected by a fibre link with an HP 2810 on each end. Right now there's only one VLAN being used (the default VLAN), but I need to link 3 VLANs from one switch to another.

I have no problem creating the VLANs, my only problem is setting up the trunk that connects the two switches, mainly because I have only one port to do it (the one that's connected to the fibre channel converter).

How can I create this trunk with only one port (24) and use it to transport the 3 VLANs?

Please check the attached map for more information.

Thank you very much!

[EckerA · Accepted solution]

hi,
here you go:
conf t
vlan 100
untagged 24
exit
vlan 200
tagged 24
exit
vlan 300
tagged 24
exit
wr mem

hth
alex

[Ricardo Saramago]

There's no need for trunking???

[EckerA]

Hi,
a cisco trunk is tagging/untagging in the hp world.
a hp trunk is link aggregation for more bandwith.
hth
alex

[Ricardo Saramago]

Thanks!