Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Help with VLAN / Trunking HP 2810

SOLVED
Go to solution
Ricardo Saramago
Occasional Advisor

Help with VLAN / Trunking HP 2810

Hello,

I have two sites connected by a fibre link with an HP 2810 on each end. Right now there's only one VLAN being used (the default VLAN), but I need to link 3 VLANs from one switch to another.

I have no problem creating the VLANs, my only problem is setting up the trunk that connects the two switches, mainly because I have only one port to do it (the one that's connected to the fibre channel converter).

How can I create this trunk with only one port (24) and use it to transport the 3 VLANs?

Please check the attached map for more information.

Thank you very much!
4 REPLIES
EckerA
Respected Contributor
Solution

Re: Help with VLAN / Trunking HP 2810

hi,
here you go:
conf t
vlan 100
untagged 24
exit
vlan 200
tagged 24
exit
vlan 300
tagged 24
exit
wr mem

hth
alex

Ricardo Saramago
Occasional Advisor

Re: Help with VLAN / Trunking HP 2810

There's no need for trunking???
EckerA
Respected Contributor

Re: Help with VLAN / Trunking HP 2810

Hi,
a cisco trunk is tagging/untagging in the hp world.
a hp trunk is link aggregation for more bandwith.
hth
alex
Ricardo Saramago
Occasional Advisor

Re: Help with VLAN / Trunking HP 2810

Thanks!