Hewlett Packard Switch 4108gl

[rogerp_1]

Hewlett Packard Switch 4108gl
P/N: J4865A
Configured with an additional 24-port module giving a total of 96 10/100 ports.

Hi, can anyone please help, we are going mad trying to find out some info on the above switch.

We've had it for around 3 years and its never had a problem.

We need to find out if it is possible for this switch to support POE (power over ethernet) in any way at all.

[Travis Truax]

I don't think they ever made a card that supports PoE for the 4108.
We just use PoE injectors wherever needed.
http://www.hyperlinktech.com/web/bt_cat5_p1.php
Maybe a bit more clutter - but PoE switches seem to cost a bundle, and we tend to only need PoE on 1 or 2 ports per 24 port switch....

Travis-

[Jonathan Axford]

Hi, we run these switches too and have to use PowerDsine POE hubs to supply power for the phones.

I have never found any info about them being able to support POE in the modules themselves...