Switches, Hubs, and Modems
1748202 Members
3071 Online
108759 Solutions
New Discussion юеВ

High collision or drop rate (formerly overbandwidth) Action taken:Warning issued and port disabled.

 
LaurentLaRochelle
Occasional Advisor

High collision or drop rate (formerly overbandwidth) Action taken:Warning issued and port disabled.

Hello,

I ve this event on my PCM+ on a procuvre 3500 {High collision or drop rate (formerly overbandwidth) Action taken:Warning issued and port disabled.}... but i don't know what does it mean ... and which port is concern ?

Thank you for your answers

Laurent

PS : Sorry for my very bad english ...
2 REPLIES 2
cenk sasmaztin
Honored Contributor

Re: High collision or drop rate (formerly overbandwidth) Action taken:Warning issued and port disabled.

hi
check system cable architecture cat5 or more better cable and good cable installation.

check NIC to provite 802.3 and 802.3u standart and update nic driver.

take of other small hub and switch on procurve 3500 switch

check duplex speed incompatibility nic and switch port

enable spaning tree protocol switch or switchs
(config)#spanning-tree

good luck
cenk

Mohieddin Kharnoub
Honored Contributor

Re: High collision or drop rate (formerly overbandwidth) Action taken:Warning issued and port disabled.

Hi

Check this very useful link:

http://www.hp.com/rnd/library/troubleshoot_lan.htm?jumpid=reg_R1002_USEN

Good Luck !!!
Science for Everyone