Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

How configure access list with MAC addresses on Procurve 5406zl

SOLVED
Go to solution
RRosas
Occasional Advisor

How configure access list with MAC addresses on Procurve 5406zl

I need configure an access list using MAC addresses on Procurve 5406zl switch with K.12.51 IOS version. How can I do it?
7 REPLIES
cenk sasmaztin
Honored Contributor

Re: How configure access list with MAC addresses on Procurve 5406zl

no RRosas imposible acl with mac address

you can create on 5400
standart and exdented acl and assign port or vlan interface

or you can create domanin user base acl dynamically with IDM


cenk
cenk

EckerA
Respected Contributor
Solution

Re: How configure access list with MAC addresses on Procurve 5406zl

Hi,
don't know for sure, but i think this works only with an authanticationserver like radius or tacacs.
i have it running at the clientports from 1 customer with iis and activedirectory.
at the switch site it's not that difficult.

aaa authentication port-access chap-radius
radius-server host key
aaa port-access mac-based
aaa port-access mac-based addr-limit x // with x= Numbers of Clients on the Port

for the server side i have notes with pictures how i did it, but it's in german. but if you don't mind i'm willing to share the notes.
ben
Mohieddin Kharnoub
Honored Contributor

Re: How configure access list with MAC addresses on Procurve 5406zl

Hi

MAC ACLs are not available on ProCurve switches,

However if you can share with us what do you want to achieve exactly, we can find a way to do it.

Good Luck !!!
Science for Everyone
RRosas
Occasional Advisor

Re: How configure access list with MAC addresses on Procurve 5406zl

Hi,

Thanks for your help. I need to block Internet access for some PC´s but we have a DHCP server for IP addresses assignments, for it I was thinking to configure the access list using MAC address. Do you have some idea for it?

Thanks again.
cenk sasmaztin
Honored Contributor

Re: How configure access list with MAC addresses on Procurve 5406zl

hi RRosas
my advice two method for you

method 1

you can use IDM create user base access list on network no need ip address no need mac address information assign on domain user dynamic acl


methot 2

you can create vlan's on network and sperate user group with vlan and assign acl on vlan's


cenk

cenk

RRosas
Occasional Advisor

Re: How configure access list with MAC addresses on Procurve 5406zl

Thanks for your comments.
Ahmad1_1
Occasional Visitor

Re: How configure access list with MAC addresses on Procurve 5406zl

How configure access list on Procurve 2626 switch j49000b