Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

How do I enable and Configure Virus Throttling on 5300xl switch

SOLVED
Go to solution

How do I enable and Configure Virus Throttling on 5300xl switch

Hi can you help me enable and configure Virus Throttling on Procurve 5300xl? Can you give me some sample configurations and how it works? Thanks!
3 REPLIES
Matt Hobbs
Honored Contributor
Solution

Re: How do I enable and Configure Virus Throttling on 5300xl switch

It's a fairly straight forward feature to setup. The basic commands are:

Global and Per-Port Configuration:
connection-rate-filter sensitivity < low | medium | high | aggressive
filter connection-rate < port-list > < notify-only | throttle | block
show connection-rate-filter < blocked-host >

Unblocking Hosts Per-VLAN:
vlan < vid > connection-rate-filter unblock

I recommend you read the chapter on this topic in the Access Security Guide: ftp://ftp.hp.com/pub/networking/software/6400-5300-4200-3400-Security-Oct2006-59906052.pdf
Mohieddin Kharnoub
Honored Contributor

Re: How do I enable and Configure Virus Throttling on 5300xl switch

Hi

In the following link you can find the Virus Throttling concept and configuration steps with Examples:

ftp://ftp.hp.com/pub/networking/software/6400-5300-4200-3400-Security-Oct2006-59906052-Chap03.pdf

Good Luck !!!
Science for Everyone

Re: How do I enable and Configure Virus Throttling on 5300xl switch

Thanks for your help now I can start planning howto implement it.