Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

How do I use SNMP to get power supply status on HP5412ZL switch?

victor31
Occasional Visitor

How do I use SNMP to get power supply status on HP5412ZL switch?

 

I am using "the dude" software and when I run walkmib I cannot see anyhting about power supplies plus all OIDs start with 1.3.6.1.2.1..........?

1 REPLY
Richard Brodie_1
Honored Contributor

Re: How do I use SNMP to get power supply status on HP5412ZL switch?

Start at: 1.3.6.1.4.1.11.2.14.11.1.2.6.1

 

There are some bugs (depending on the firmware release), where an SNMPwalk won't recurse over the whole tree.