Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

How to configure Syslog params on ProCurve 25xx & 26xx

Steve Weaver_4
Occasional Visitor

How to configure Syslog params on ProCurve 25xx & 26xx

I'm running syslog-ng on Suse 9.2. I'm new to procurves. Is there a cli reference still available or a how-to that walks you through the server and facility params? I would greatly appreciate any insight on this.
Sincerely,
Steve Weaver
1 REPLY
Les Ligetfalvy
Esteemed Contributor

Re: How to configure Syslog params on ProCurve 25xx & 26xx

There is a CLI reference available at http://www.hp.com/rnd/support/manuals/index.htm and the CLI commands you probably want are:
config
logging 10.20.30.40 <= put syslog IP here
write mem

You can see what settings your have with:
show debug