Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

How to set ssh to login as Manager

seymour999
Frequent Advisor

How to set ssh to login as Manager

On some 2824 switches recently configured for ssh, after successfully logging in using ssh you are

in Operator mode. To get into Manager mode you must enter "enable" and login again.

 

How should I configure the switch so an ssh login goes directly into Manager mode?   

3 REPLIES
ArjanA
Advisor

Re: How to set ssh to login as Manager

Make sure that you use different usernames and passwords for operator and manager.

Login with the manager account instead of the operator account.

Arimo
Respected Contributor

Re: How to set ssh to login as Manager

Hi Seymour

 

Do you use different keys for operator and manager?

Does this happen when you just SSH in, or are you logging in through some sort of SSH script?


HTH,

Arimo
HPE Networking Engineer
swaizey
Advisor

Re: How to set ssh to login as Manager

The command you need is:

aaa authentication login privilege-mode

 

Cheers.