Howto seperate different vlan network

[Joseph Bague]

Hi,

We have a hp procurve 5308xl with different vlan (ip routing enabled), we want to seperate some vlan to other vlan thru acl, I tried searching the internet for sample guide but found none.. do you have any link...or any help will be appreciated.

Thanks in advance

[Matt Hobbs · Accepted solution]

Joseph,

First I would recommend you read through the ACL chapter in the Advanced Traffic Management Guide:

ftp://ftp.hp.com/pub/networking/software/6400-5300-3400-AdvTrafficMgmt-Oct2005-59906051.pdf

I have also attached a basic ACL configuration from a few years ago. I think it's right.

Don't forget to assign points to posts that have helped you.

[Mohieddin Kharnoub]

Hi Joseph

Regarding Vlan in the 5300xl you can use this configuration example:
http://www.hp.com/rnd/support/config_examples/5300xl_portbase.pdf

And for controlling VLANS by using ACLs you have the Advanced Traffic Management document:
ftp://ftp.hp.com/pub/networking/software/6400-5300-3400-AdvTrafficMgmt-Oct2005-59906051.pdf

Or if you want i can help you to sort it, just explain to us what exactly do you want to do.

Good Luck

[Joseph Bague]

Thank you very much... I will reply back again as soon I have another question :)