Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Hp 2650 ProCurve excessive HP broadcasts

tim barlow
Occasional Visitor

Hp 2650 ProCurve excessive HP broadcasts

Every 60 secs I see flood of "HP switch protocol" packets in Wireshark flooding/broadcasting everyone in the same vlan. I want to turn off or disable so it does bleed over to other remote sites on same vlan

firmware version
H.08.98
3 REPLIES
Olaf Borowski
Respected Contributor

Re: Hp 2650 ProCurve excessive HP broadcasts

Tim,

The command should be:

"no stack" in config mode.

This disables the stacking feature.

Olaf

tim barlow
Occasional Visitor

Re: Hp 2650 ProCurve excessive HP broadcasts

I will have admin try that
Thanks
tim barlow
Occasional Visitor

Re: Hp 2650 ProCurve excessive HP broadcasts

Thanks for your help it worked, you da man!