Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

IAS and Radius authorization failure

Joerg Wiedemann
Occasional Contributor

IAS and Radius authorization failure

When logging in to a Procurve 2610-24 switch using IAS the request gets authenticated sucessfully according to the IAS eventlog, but on the switch the access is denied by an authorization failure.

With "aaa authentication login privilege-mode" I get "Access denied: no user's privilege level supplied by the RADIUS"

With "aaa authentication login privilege-mode" turned off I get "Access denied: no user's authorization info supplied by the RADIUS server"

Any idea how get this going ?

Regards
Joerg
2 REPLIES
Joerg Wiedemann
Occasional Contributor

Re: IAS and Radius authorization failure

I found the answer. One have to either create 2 VSA in ISA or set the "aaa authorization command" to "none" instead of "radius".

Joerg
Joerg Wiedemann
Occasional Contributor

Re: IAS and Radius authorization failure

Create 2 HP VSA in ISA